<![CDATA[ACCESSORY-MU Handcrafted Jewelry, Crafts & Graphic Design - Blog]]>Fri, 10 Apr 2026 08:50:45 -0700Weebly<![CDATA[How to Make a Cowrie Shell Flower]]>Thu, 05 Mar 2026 08:00:00 GMThttp://www.accessorymu.com/blog/how-to-make-a-cowrie-shell-flowerAs an Amazon Associate I earn from qualifying purchases. Please read my Amazon Associates Program for more info.
This tutorial shows how to create a shell flower using five back-cut cowrie shells and natural polished hemp cord. The video demonstrates how to assemble the shells into a flower shape and secure the center for a clean, stable finish.

This shell flower can be used as a focal element for bracelets, necklaces, or other handmade jewelry projects.
​
Watch the full step-by-step video tutorial below.
Materials Used:
  • 5 back-cut cowrie shells 0.7"-0.86" (18–22mm) https://amzn.to/4cXelre 
  • Natural polished hemp cord (20LB, 18 inches)
  • Industrial-strength adhesive (optional) E6000 https://amzn.to/402E8Zl

This project is beginner-friendly and requires only simple knotting techniques.

​Please note that any crafts or DIY projects should be attempted with caution.

Accessory Mu is not responsible for any damages or injuries that may occur in connection with the use of this tutorial.
GO TO ETSY SHOP
]]><![CDATA[Easy DIY Adjustable Bracelet with Waxed Cotton Cord]]>Fri, 11 Jul 2025 22:01:57 GMThttp://www.accessorymu.com/blog/easy-diy-adjustable-bracelet-with-waxed-cotton-cordAs an Amazon Associate I earn from qualifying purchases. Please read my Amazon Associates Program for more info.
I created this bracelet using assorted beads I purchased long ago and recently rediscovered in a box. The wooden beads came from a small independent shop that no longer exists — so while I can’t share exact supplies, I hope this inspires you to use what you already have or find your own unique mix. Handmade from the heart using wood and acrylic beads. 
Waxed cotton cord bracelet supplies
Supplies: 
  • Old-World Acrylic Bead Mix by Bead Design Co. https://www.hobbylobby.com/beads-jewelry/beads/acrylic-plastic-beads/old-world-acrylic-bead-mix/p/81199036
  • Red wooden beads (6x9mm)
  • Wooden bead mix
  • 1mm Black waxed cotton cord - https://amzn.to/3RBSuM5
  • Clear nail polish (Optional)
  • Scissors
Creating Adjustable Cord Bracelet
Instructions for DIY waxed cotton cord bracelet with red wood beads and acrylic bead mix
​Instructions:
  1. Cut 2 x 16-inch waxed cotton cords (1mm).
  2. Thread both cords through the acrylic bead (1 inch). Center the bead at the midpoint of the cords.
  3. Tie a knot on each side to secure it.
  4. On one side, thread a red wooden bead onto one cord.
  5. Wrap the other cord around the bead. Tie both cords together above the bead.
  6. Thread a mix of round and 5x8mm wooden beads onto one cord. Wrap the other cord around the beads.
  7. Tie both cords together above the bead.
  8. Repeat on the opposite side.
  9. Thread one cord ends through a wooden bead.
  10. Thread the other cords through the bead in the opposite direction.
  11. Adjust cords to even lengths. Trim any excess cords.Tie a knot at each cord end.
  12. Seal cord ends with clear nail polish. (Optional)

​Please note that any crafts or DIY projects should be attempted with caution.
Enlarging wood bead hole instructions
 Bead variations - Personalize it your way with different beads!
Waxed cotton cord rustic bracelet design variations
Accessory Mu is not responsible for any damages or injuries that may occur in connection with the use of this tutorial.
]]><![CDATA[DIY Jute Ring Shell Pendant Necklace | Easy Cowrie & Bead Tutorial]]>Fri, 27 Jun 2025 22:36:33 GMThttp://www.accessorymu.com/blog/diy-jute-ring-shell-pendant-necklace-easy-cowrie-bead-tutorialAs an Amazon Associate I earn from qualifying purchases. Please read my Amazon Associates Program for more info.
Bring a touch of rustic, coastal charm to your style with this easy DIY tutorial! In this video, you’ll learn how to wrap a metal key ring with jute cord, add a beautiful cowrie shell, coconut wood beads, and a sun bead, then finish it off with a simple handmade necklace cord. Simple yet impactful. Follow along and create your own unique shell pendant necklace! ​

Picture
Materials for Pendant
Picture
Materials for Necklace Cord
Picture
Basic Tools
Tools & Materials
  • Coconut wood beads; brown (8mm) - https://amzn.to/4iQnV0t
  • Cowrie shell beads (Back cut/White 0.7"-0.86") - https://amzn.to/4cXelre
  • Extender chains (Optional) - https://amzn.to/3IiY7Nz
  • Fold over cord end cap crimps 12mm - https://amzn.to/4kY6P2p
  • Jute cord
  • Jump rings
  • Lobster claw clasps
  • Metal key ring - 0.875 inch Diameter Standard Size
  • Natural polished hemp cord 20 lb; Brown (Cousin DIY Polished Thin Hemp 20 lb Cord 1mm Jewelry String, 300 ft, Brown)
  • Pliers https://amzn.to/3rN72yX
  • Scissors
  • Sun bead 18x6mm (by bead design co.)
  • Waxed cotton cord 1.5mm - https://amzn.to/3I6RBtj
​Make the Jute-Wrapped Ring
Picture
Instructions:
  1. Cut a 14" jute cord.
  2. Clip one end, leaving a 1" tail. Begin wrapping around the metal key ring.
  3. Continue wrapping until the ring is nearly covered.
  4. Apply fabric glue to the end and wrap tightly to finish.
  5. Trim excess cord. 
  6. Glue to secure fully.
Making the Pendant
Picture
Instructions:
  1. Cut a 20" hemp cord. Thread one cord front-to-back through the cowrie shell. 
  2. Thread the other back-to-front through the shell. 
  3. Tie a knot just above the shell. 
  4. Thread both cords through two coconut shell beads (8mm).
  5. Tie a knot.
  6. Position the jute-wrapped ring above the knot: One cord wraps in front, the other behind. Slide both cords through the sun bead. Center the sun bead in the jute ring. Use pliers if needed.
  7. Wrap one cord around the front, one around the back of the ring. 
  8. Tie a knot just above the ring to hold it in place. Add two more coconut beads, tie a knot.
  9. Form a loop above the last knot and tie again. 
  10. Apply fabric glue at the base of the loop, wrap cord ends around.
  11. Trim any excess cords. 
  12. (Optional) Add jewelry glue for added strength.​
Adding a Bail
Picture
Instructions:
  1. Heavy gauge rectangular necklace chain.
  2. Use pliers to remove one link from a rectangular chain — this becomes your bail.
  3. If needed, use round nose pliers to enlarge the loop, and attach the bail.
Making the Necklace Cord
Picture
Instructions:
  1. Cut; Two 15" pieces of waxed cotton cord, One 15" piece of natural hemp cord.
  2. Secure ends with fold-over cord end crimps.
  3. Add extender chain (4" long) and lobster clasp. (Optional) Add a decorative end (attach a 5mm wooden bead with T-pin to the end of the extender if desired.

​​Please note that any crafts or DIY projects should be attempted with caution.
Accessory Mu is not responsible for any damages or injuries that may occur in connection with the use of this tutorial.
]]><![CDATA[DIY Rustic Cowrie Shell Bracelet with Wooden & Acrylic Beads]]>Wed, 07 May 2025 19:56:51 GMThttp://www.accessorymu.com/blog/diy-rustic-cowrie-shell-bracelet-with-wooden-acrylic-beadsAs an Amazon Associate I earn from qualifying purchases. Please read my Amazon Associates Program for more info.
I created this jewelry set using assorted beads I purchased long ago and recently rediscovered in a box. The wooden beads came from a small independent shop that no longer exists — so while I can’t share exact supplies, I hope this inspires you to use what you already have or find your own unique mix. Handmade from the heart using wood, acrylic, and cowrie shell beads.
Matching Necklace Youtube Video
Matching Earrings Youtube Video
Materials for cowrie shell thin waxed cotton cord bracelet
​​Materials
  • Brown Coconut Shell Beads:  https://amzn.to/4iQnV0t
  • ​Cowrie Shell Beads:  https://amzn.to/4cXelre
  • ​Old-World Acrylic Bead Mix​ - Bead DesignCo.: https://www.hobbylobby.com/beadsjewelry/beads/acrylic-plastic-beads/old-world-acrylic-bead-mix/p/81199036
  • ​Wooden Bead Mix
  • ​Wooden Tube Beads - 4mm by Bead Landing™: https://www.michaels.com/product/wooden-tube-beads-4mm-by-bead-landing-10666600?michaelsStore=2109&inv=3
  • ​​1mm Black Waxed Cotton Cord:  https://amzn.to/3RBSuM5
  • ​Bead reamer (Optional):  https://amzn.to/3YNlFzz
  • Clear Nail Polish (Optional)
Please note that any crafts or DIY projects should be attempted with caution.
Creating Cowrie Shell Bracelet
Picture
Instructions:
  1. Cut 2 x 17-inch waxed cotton cords (1mm). Thread one cord front-to-back through the shell.
  2. Thread the other back-to-front through the shell.
  3. Place the cowrie at the midpoint, then knot both sides to secure.
  4. 2 coconut (8mm) + 1 acrylic (9mm) + 2 coconut (8mm)
  5. Thread both cords through the beads. 
  6. 1 acrylic (7mm) + 1 wood (5mm)
  7. Thread the mix of beads onto one cord.
  8. Wrap the other cord around the bead. Tie both cords together above the bead. Repeat on the other side.
  9. Thread one cord ends through a wooden bead.
  10. Thread the other cords through the bead in the opposite direction.
  11. Adjust cords to even lengths. Trim any excess cords.Tie a knot at each cord end.
  12. Seal cord ends with clear nail polish. (Optional)​
Picture
Picture
Reddish Bead Variation
​A fresh take on the original cowrie shell bracelet—this version adds reddish accent beads for a subtle pop of color. Earthy, handmade, and perfect for layering with your favorite boho pieces!
Picture
Same natural charm, with a hint of red. A subtle update to your favorite shell bracelet.
]]><![CDATA[How to Make a Boho Macrame Bracelet with Colorful Wood Buttons]]>Tue, 28 Jan 2025 23:09:08 GMThttp://www.accessorymu.com/blog/how-to-make-a-boho-macrame-bracelet-with-colorful-wood-buttonsAs an Amazon Associate I earn from qualifying purchases. Please read my Amazon Associates Program for more info.
Looking for a fun and creative jewelry-making project? Wooden button bracelets are a beautiful and versatile accessory that you can customize with different colors and patterns. Whether you love the boho aesthetic or just enjoy making unique handmade pieces, this tutorial will walk you through the process step by step—at a slower pace, so you can follow along easily!
Macrame bracelets with wooden buttons are not only stylish but also reversible, giving you two different looks in one piece! Plus, they make wonderful gifts or a great addition to your own accessory collection.
​
In this tutorial video, you’ll learn:
​
  • How to use wooden buttons in macrame bracelets.
  • Simple techniques to create a reversible design.
  • A slower-paced walkthrough to help you follow each step with ease.

If you prefer a fast-paced guide video, you can check out the original post at DIY Boho-Style Wooden Button Bracelets - Tutorial video for Colorful and Beautiful Handmade Bracelets

Happy crafting!
Materials for Boho Reversible Wooden Button Macrame Bracelet
Materials for Boho Reversible Wooden Button Macrame Bracelet
​Tools & Materials
​• Earth ceramic round beads  (8mm) by Bead Landing™
• CCB (Copper coated plastic) - Assorted CCB Round Beads by Bead Landing™
• Metal round beads (6mm)
• Wood rings (12mm)
• Faux suede cord (2.6mm x 1.5mm): https://amzn.to/3Ye0Hsj 
• Fabric glue: ​ https://amzn.to/3Qir3r8 
• Natural polished hemp cord 20L; Brown: Cousin DIY Polished Thin Hemp 20 lb Cord Jewelry String, 300 ft, Brown
• Round nose plier (Optional)
• Scissors
• Toothpicks
• Wood glue: https://amzn.to/43GmDNO ​
• Wooden buttons 20mm Circle 2 holes: https://amzn.to/44IPaUj
Choosing large hole beads for bracelet making

Creating Boho Wooden Button Bracelets

Step-by-Step Instructions for Boho Style Wooden Button Reversible Macrame Bracelet
​Instructions:
  1. Cut natural hemp cord into six strands: four strands measuring approx. 20 inches and two strands measuring approx. 14 inches. Leave approx. 2.5-3 inches and tie a knot at the top of each cord. Separate the cords into three sections: two strands of 20-inch-long cords to the left, two strands of 14-inch cords to the middle, and two strands of 20-inch cords to the right.
  2. Make two macrame square knots, alternating between the left and right sections (left, right, left, right). See the macrame square knot instruction below. Thread a 6mm green metal bead through the two middle cords to the top.
  3. Repeat Step 3. Thread a ceramic bead through the middle cords to the top, and repeat Step 3. The top half of the bracelet is now complete.
  4. Take a 20mm reversible two-hole wooden button (See the reversible wooden button instruction below) and grab the two middle cords, holding them separately. Weave the cords back and forth through the two holes in the wooden button.
  5. Repeat Steps 2-3 to create the bottom half of the bracelet. This time, begin with a ceramic bead and follow with a green metal bead.
  6. Secure the cord end: Take 4 strands and create a loop. 
  7. Hold the loop and use the remaining two strands to wrap around the loop, then tie a knot to secure. Repeat the process for the other end.
  8. Use fabric glue to secure the loop ends.
  9. Apply wood glue to both sides of the button, and press the left and right cords onto the button. Hold in place until dry.
  10. Cut one piece of hemp cord and one piece of faux suede cord to approx. 8.5 inches. Cut another set.
  11. Thread a hemp cord and faux suede cord through one of the bracelet loop ends, and fold them in half. Hold all four cord ends together and thread a CCB antique brass bead with a large hole through all four cords. Pull the bead down towards the loop end to secure the cords. Repeat this process for the other bracelet loop end.
  12. Thread three wooden rings through one of the cord ends, and thread the other cord ends through the wooden rings from the opposite side. Tie a knot at each end.

Macrame Square Knot: A Quick Guide

Step-by-Step macrame square knot instructions
Creating reversible wooden buttons
Instructions for reversible wooden buttons
  1. Take a single-sided wooden button (20mm circle).
  2. Apply a small amount of wood glue to the back of the button using a toothpick.
  3. Take another single-sided button and glue it onto the back of the first button, sandwiching the two buttons together. Press firmly and hold in place until the glue dries completely. You now have a reversible wooden button.
Tip 1 - Preventing hemp cord from fraying
To prevent the hemp cord from fraying when threading through beads multiple times, apply a small amount of wood glue to the cord end.​
Preventing hemp cord from fraying
  1. Dip the end of the hemp cord into the wood glue and remove any excess glue.
  2. Use a paper towel to remove any excess glue if necessary. Allow the wood glue to dry completely before using the cord.
Tip 2 - Applying nail polish to wooden buttons
To protect the surface and colors of wooden buttons, apply a clear nail polish.​
Applying nail polish to wooden buttons
  1. Dip the brush of the clear nail polish into the bottle and remove any excess polish.
  2. Apply a thin, even coat of nail polish to the surface of the wooden button, covering the entire area. For added protection, apply a second or third coat once the previous coat is dry.
  3. Allow the nail polish to dry completely before handling the buttons.
​Please note that any crafts or DIY projects should be attempted with caution.
Boho Style Reversible Wooden Button Macrame Bracelets
]]><![CDATA[DIY Sun Catcher with Wire-Wrapped Crystal]]>Thu, 09 Jan 2025 20:29:23 GMThttp://www.accessorymu.com/blog/diy-sun-catcher-with-wire-wrapped-crystalAs an Amazon Associate I earn from qualifying purchases. Please read my Amazon Associates Program for more info
Create your own earthy sun catcher with this easy DIY! Featuring wire-wrapped crystals, rings, and decorative beads, this handmade piece will brighten up any space. Perfect for adding charm and sparkle to your home! ​​
​Materials:
  • CCB Spacer beads 7mm: Assorted CCB Round Beads by Bead Landing (antique brass) 
  • Cotton cord or yarn 
  • Crystal pieces
  • Faux suede cord:  https://amzn.to/3Ye0Hsj ​
  • Jute cords
  • Jump rings: 12mm
  • Steel rings: 2 inches/3 mm & 3 inches/3 mm
  • Wood beads 10 mm
  • Wire: copper/gauge 30 (or 28-24 gauge for a thicker option)

Wire Choices: Delicate or Sturdy?

Picture

Wire Wrapping: A Quick Guide

Picture
​Please note that any crafts or DIY projects should be attempted with caution.

Mix and match colors

Picture
Picture
]]><![CDATA[DIY Boho Macrame Hanging Accessory - Add a Touch of Boho Charm to Your Space with This Easy Tutorial]]>Sun, 03 Nov 2024 04:55:15 GMThttp://www.accessorymu.com/blog/diy-boho-macrame-hanging-accessory-add-a-touch-of-boho-charm-to-your-space-with-this-easy-tutorialAs an Amazon Associate I earn from qualifying purchases. Please read my Amazon Associates Program for more info
Add a bit of handcrafted beauty to your space with this mini macrame hanging accessory! This stylish piece brings a warm, boho-inspired touch to any room, blending natural textures and artistic design. Perfect as a wall hanging or car charm, this project is an ideal way to express your creativity and make something truly unique. Get ready to dive into a relaxing craft session and create your own stunning decor!
Materials:
  • Assorted CCB Round Beads by Bead Landing (antique brass)
  • Cotton yarn (Medium Size 4)
  • Driftwood sticks
  • Jute cord:  https://amzn.to/3Yg7t0K
  • Jump rings
  • Metal feather charms 1.06in/27 mm:  https://amzn.to/40uu3Wk
  • Pliers:  https://amzn.to/3tmAM6i
  • Wood beads

​Please note that any crafts or DIY projects should be attempted with caution.
Materials for Mini Macrame Hanging Accessory
]]><![CDATA[Chic and Simple: DIY Shade of Red Yarn-Warpped Bead Necklace Tutorial Guide]]>Sat, 25 Nov 2023 22:33:50 GMThttp://www.accessorymu.com/blog/chic-and-simple-diy-shade-of-red-yarn-warpped-bead-necklace-tutorial-guideAs an Amazon Associate I earn from qualifying purchases. Please read my Amazon Associates Program for more info
Dive into the world of DIY creativity with this guide on crafting a cozy and unique necklace adorned with shades of red yarn-wrapped beads. This simple yet elegant project combines the warmth of red hues with the durability of 1 mm waxed cotton cord, resulting in a unique accessory that reflects your personal touch. Join me on this crafting journey and discover the joy of handmade beauty.
Picture
Tools & materials for colorful yarn-wrapped bead necklace
Supplies:
  • Acrylic metallic faceted beads (color: gold) - 4 mm
  • CCB beads by Bead Landing™ (color: antique brass, copper coated plastic) - 10 mm round ​
  • Oxidized Brass 2 Hole Metal Spacer Bar Bead by hildie & jo
  • Metal beads - 4 mm oxidized brass round
  • Natural wood beads - 15 mm: https://amzn.to/3T0RJOE
  • Bead reamer
  • Nail Polish (clear)
  • Fabric glue: https://amzn.to/47qnGnI​
  • Scissors
  • Pliers (Optional): https://amzn.to/3uytayi
  • Yarn in various colors
  • Waxed cotton cord - 1 mm: https://amzn.to/3Rh6ono
Creating Yarn Ball Beads
Red Yarn-Warpped Bead tutorial step-by-step instructions
Instructions:
  1. Apply fabric glue to the top half of the wooden bead.
  2. Wrap the yarn around the glued portion of the wooden bead.
  3. Apply glue to the remaining half.
  4. Continue wrapping yarn around the wooden bead until it is completely covered. 
  5. Trim any excess yarn. 
  6. Apply more glue for durability if necessary.
  7. Gently roll the yarn-wrapped bead between your palms for a smooth and secure finish.
  8. Allow the yarn ball beads to dry completely.
  9. If yarn covers holes, use a bead reamer to create openings cautiously.​
Experimenting with Colors and Textures
Yarn-wrapped wooden beads showing different colors and textures
You can explore blending two different colors and/or textures to craft unique and personalized beads.

Diversify your collection by crafting additional beads using various colors and textures of yarn. For this project, aim to create six yarn beads to fashion a complete and vibrant necklace. ​
 Assembling Adjustable Cord Necklace ​
Red Yarn-Warpped Bead Necklace tutorial step-by-step instructions
Instructions:
  1. Start by cutting a piece of black waxed cotton cord to a length of 34 inches.
  2. To prevent the cord from fraying when threading through beads multiple times, apply a small amount of nail polish (or glue) to the cord's end. (Optional)
  3. Collect the following beads: seven 10-mm CCB round beads, six yarn beads, two 4-mm metal round beads (oxidized brass), two 4-mm acrylic faceted beads (color: gold), and one oxidized brass 2 hole metal spacer bar bead.
  4. Thread one 4-mm metal round bead (oxidized brass), 10-mm CCB round bead and a yarn ball bead onto the waxed cotton cord.
  5. Repeat this pattern, excluding the 4-mm metal bead. Add one 4-mm metal bead at the end.
  6. Take an oxidized brass 2 hole metal spacer bar bead. Thread each cord end through one hole of the spacer bar bead.
  7. Thread one 4-mm acrylic faceted bead onto each cord end.
  8. Tie a knot on each cord end to secure the beads and spacer bar.
  9. So there you have it, your very own one-of-a-kind necklace. A touch of warmth, a dash of elegance, and a whole lot of you. Enjoy wearing it or gifting it to spread the joy of handmade creativity.
Alternative methods to finish cord ends
There are alternative methods to finish cord ends. While this project utilizes an adjustable cord closure with a 2-hole spacer bar bead, you have the flexibility to use crimp cord end caps or tie knots for a cord loop closure.​
​Crimp Cord End Closure
​Jewelry Crimp Cord End Closure step by step instruction guide
​Crimp Cord End Closure:
​Secure cord ends with bead crimps for a polished finish. Slide a bead crimp onto each cord end. Use pliers to flatten the crimps, securing the cords in place. Trim any excess cord.
Loop Closure
Waxed cotton jewelry cord loop closure step-by-step instruction guide
Loop Closure:
​Create a loop at the cord end. Wrap the shorter cord around the base twice. Thread it through the two loops from top to bottom. Pull tight to secure, ensuring a snug knot. 
Jewelry cord end closure options
Glue: Trim any excess cord and use jewelry glue to reinforce and secure the loop ends.

Crimp beads: Alternatively, you can opt for crimp beads to provide additional stability, securing them just below the knot for a polished finish.

​​​​​Please note that any crafts or DIY projects should be attempted with caution.
Explore necklaces & earrings with the same style as yarn-wrapped bead necklace, but with different colors and textures for a unique look.

Same Style Necklace: DIY Adjustable Statement Necklace with Yarn-Wrapped Ball Beads
​Same Style Earrings: DIY Earrings Tutorial - Yarn-Wrapped Magic: Creating Unique Wooden Bead Earrings
Same Style Necklace: DIY Adjustable Navy Cord-Wrapped Large Ball Bead Statement Necklace - Jewelry Making at Home
Same style Earrings: Easy DIY Navy Cord-Wrapped Ball Bead Earrings: A Step-by-Step Guide​
]]><![CDATA[DIY Adjustable Navy Cord-Wrapped Large Ball Bead Statement Necklace - Jewelry Making at Home]]>Wed, 01 Nov 2023 20:33:24 GMThttp://www.accessorymu.com/blog/diy-adjustable-navy-cord-wrapped-large-ball-bead-statement-necklace-jewelry-making-at-homeAs an Amazon Associate I earn from qualifying purchases. Please read my Amazon Associates Program for more info
In this blog post, I will walk you through the steps to create your own Navy Cord-Wrapped Large Ball Statement Necklace. Using a 1mm black waxed cotton cord, CCB beads and Navy cord-wrapped large beads, it's a straightforward project to craft a unique accessory that can be worn over a turtleneck sweater or with various outfits. The adjustable cord not only allows for versatility in styling but also ensures a comfortable and customizable fit, making it a practical choice for any occasion.
​
If you're looking to complete your jewelry collection, check out the related posts: 
​
Matching Earrings: Easy DIY Navy Cord-Wrapped Ball Bead Earrings: A Step-by-Step Guide
Same Style Necklace: DIY Adjustable Statement Necklace with Yarn-Wrapped Ball Beads
Same Style Earrings: DIY Earrings Tutorial - Yarn-Wrapped Magic: Creating Unique Wooden Bead Earrings

These posts offer additional DIY ideas and tutorials in the same style as the Adjustable Cord-Wrapped Large Ball Statement Necklace. Let's get started on this creative journey!
Picture
Matching Earrings
Easy DIY Navy Cord-Wrapped Ball Bead Earrings: A Step-by-Step Guide
Picture
Same Style: Yellow Yarn Earrings
DIY Earrings Tutorial - Yarn-Wrapped Magic: Creating Unique Wooden Bead Earrings
Picture
Same Style: Yellow Yarn Necklace
DIY Earrings Tutorial - Yarn-Wrapped Magic: Creating Unique Wooden Bead Earrings
Supplies:
  • Acrylic metallic faceted beads (gold) - 4 mm
  • CCB beads by Bead Landing™ (color: antique brass) - 10 mm round & 10 mm disc​
  • Metal beads - 4 mm
  • Oxidized Brass 2 Hole Metal Spacer Bar Bead by hildie & jo 
  • Nail polish clear (optional)
  • Navy cord-wrapped wooden beads - 16 mm​
  • Waxed cotton cord 1 mm: https://amzn.to/3tYN5Gp 
Creating Navy Cord-Wrapped Bead Adjustable Cord Necklace
Picture
Instructions:
  1. Start by cutting a piece of black waxed cotton cord to a length of 34 inches.
  2. To prevent the cord from fraying when threading through beads multiple times, apply a small amount of nail polish to the cord's end. (Optional)
  3. Collect the following beads: Seven 10-mm CCB round beads, five navy cord-wrapped ball beads, two 4-mm metal beads, two 4-mm acrylic faceted beads (gold), one Oxidized Brass 2 hole metal spacer bar bead.
  4. Thread a 4-mm metal bead, a 10-mm CCB round bead, a 10-mm CCB disc bead, a navy ball bead, a 10-mm CCB disc bead, a 10-mm CCB round in that order onto the waxed cotton cord. 
  5. Repeat this pattern, excluding the 4-mm metal bead. Add one 4-mm metal bead at the end.
  6. Take an Oxidized Brass 2 Hole Metal Spacer Bar Bead. Thread each cord end through one hole of the spacer bar bead.
  7. Thread one 4-mm acrylic faceted bead onto each cord end.
  8. Tie a knot on each cord end to secure the beads and spacer bar.
  9. That's it! Enjoy wearing it or gifting it to share the joy of handmade creativity.​ ​​
Preventing Cord Fraying (Optional)
Picture
​Instructions:
  1. To prevent the cord from fraying when threading through beads multiple times, apply a small amount of nail polish to the cord's end.
  2. Use a paper towel to remove any excess nail polish if necessary. 
  3. Allow the nail polish to dry completely before using the cord.

Please note that any crafts or DIY projects should be attempted with caution.
]]><![CDATA[Easy DIY Navy Cord-Wrapped Ball Bead Earrings: A Step-by-Step Guide]]>Sun, 29 Oct 2023 18:16:07 GMThttp://www.accessorymu.com/blog/easy-diy-navy-cord-wrapped-ball-bead-earrings-a-step-by-step-guideAs an Amazon Associate I earn from qualifying purchases. Please read my Amazon Associates Program for more info
​Are you looking for a fun and easy jewelry project? Why not explore the world of crafting by making your very own oversized round bead statement earrings? These earrings not only offer a touch of individuality and elegance but also serve as wonderful, personalized gifts. Whether you're going for a laid-back look or gearing up for a special event, these earrings can complement any outfit.

In this guide, I used navy cord-wrapped large beads, but you can also create your unique yarn-wrapped large beads using the method outlined in my previous post, "DIY Earrings Tutorial - Yarn-Wrapped Magic: Creating Unique Wooden Bead Earrings."

With a little time and a dash of patience, you'll be crafting an elegant and unique pair of earrings. I hope you find as much joy in making them as I do!
Supplies:
• CCB beads (color: antique brass) by Bead Landing™:  10 mm round  & 10 mm disc
• Metal beads (antique brass) - 4 mm
• Navy cord-wrapped wooden beads - 16 mm
• Earring hooks: https://amzn.to/3FDDGqm
• Pliers: https://amzn.to/45KIJzK​
• T-pins (2" or longer)
• Wire cutters: ​https://amzn.to/45KIJzK
Creating Navy Cord-Wrapped Ball Bead Earrings
Navy cord-wrapped ball earrings step-by-step instructions
Instructions:
  1. Gather your materials.
  2. Thread one 4-mm metal bead (antique brass), one 10-mm CCB disc bead, one 16-mm navy cotton-wrapped ball bead, one 10-mm CCB disc bead, and one 10-mm CCB round bead in that order onto a T-pin. 
  3. If the T-pin is longer than desired, trim it to leave approximately 10 mm (⅜”) above the last bead.​
  4. Bend the trimmed end of the T-pin wire at about 45-degree angle right above the bead.
  5. Using round-nose pliers, create an eye pin loop just above the 10-mm round bead.
  6. Open the loop at the base of the earring hook using pliers.
  7. Slide the open loop of your completed earring component onto the opened loop of the earring hook.
  8. Close the loop on the earring hook securely using the round-nose pliers.
  9. Repeat these steps to create the second earring.

​​Please note that any crafts or DIY projects should be attempted with caution.
Two pairs of Navy cord-wrapped ball elegant earrings
Navy cord-wrapped ball earrings
 Two pairs of yellow yarn-wrapped ball earringsSame design as Navy cord-wrapped ball earrings
check out another tutorial video on making "DIY Earrings Tutorial - Yarn-Wrapped Magic: Creating Unique Wooden Bead Earrings" in the same style. ​
Navy cord-wrapped and yellow yarn-wrapped earrings
Two materials, one design
]]>