Blog Archives

Easy DIY Navy Cord-Wrapped Ball Bead Earrings: A Step-by-Step Guide

10/29/2023

As an Amazon Associate I earn from qualifying purchases. Please read my Amazon Associates Program for more info

Are you looking for a fun and easy jewelry project? Why not explore the world of crafting by making your very own oversized round bead statement earrings? These earrings not only offer a touch of individuality and elegance but also serve as wonderful, personalized gifts. Whether you're going for a laid-back look or gearing up for a special event, these earrings can complement any outfit.

In this guide, I used navy cord-wrapped large beads, but you can also create your unique yarn-wrapped large beads using the method outlined in my previous post, "DIY Earrings Tutorial - Yarn-Wrapped Magic: Creating Unique Wooden Bead Earrings."

With a little time and a dash of patience, you'll be crafting an elegant and unique pair of earrings. I hope you find as much joy in making them as I do!

Materials for Navy cord-wrapped ball earrings

Supplies:
• CCB beads (color: antique brass) by Bead Landing™: 10 mm round & 10 mm disc
• Metal beads (antique brass) - 4 mm
• Navy cord-wrapped wooden beads - 16 mm
• Earring hooks: https://amzn.to/3FDDGqm
• Pliers: https://amzn.to/45KIJzK
• T-pins (2" or longer)
• Wire cutters: https://amzn.to/45KIJzK

Creating Navy Cord-Wrapped Ball Bead Earrings

Instructions:

Gather your materials.
Thread one 4-mm metal bead (antique brass), one 10-mm CCB disc bead, one 16-mm navy cotton-wrapped ball bead, one 10-mm CCB disc bead, and one 10-mm CCB round bead in that order onto a T-pin.
If the T-pin is longer than desired, trim it to leave approximately 10 mm (⅜”) above the last bead.
Bend the trimmed end of the T-pin wire at about 45-degree angle right above the bead.
Using round-nose pliers, create an eye pin loop just above the 10-mm round bead.
Open the loop at the base of the earring hook using pliers.
Slide the open loop of your completed earring component onto the opened loop of the earring hook.
Close the loop on the earring hook securely using the round-nose pliers.
Repeat these steps to create the second earring.

Please note that any crafts or DIY projects should be attempted with caution.

Two pairs of Navy cord-wrapped ball elegant earrings

Navy cord-wrapped ball earrings

Two pairs of yellow yarn-wrapped ball earrings

Same design as Navy cord-wrapped ball earrings

check out another tutorial video on making "DIY Earrings Tutorial - Yarn-Wrapped Magic: Creating Unique Wooden Bead Earrings" in the same style.

Navy cord-wrapped and yellow yarn-wrapped earrings

Two materials, one design

0 Comments

How to Make Jute-Wrapped Napkin Rings from Plastic Bags

10/22/2023

0 Comments

Easy DIY Project - Transform Plastic Bags into Napkin Rings

As an Amazon Associate I earn from qualifying purchases. Please read my Amazon Associates Program for more info.

Transform ordinary plastic grocery bags into charming, eco-friendly napkin rings with this DIY tutorial. With a handful of plastic grocery bags and some simple crafting supplies, you can create natural and stylish napkin rings. It's a quick and creative way to add a rustic touch to your dining experience.

Materials:

Plastic grocery bags
Clear tape
Jute cord: https://amzn.to/3S7PgkW
Fabric glue: https://amzn.to/45NKBIa
Scissors
Clipboard (optional): https://amzn.to/499aDZ8

Creating a napkin ring using plastic grocery bags

Instructions:

Prepare plastic grocery bags.
Cut both sides of the plastic bag to form a long rectangular shape.
Fold the plastic bag into thirds, and then cut it into three equal pieces.
Layer the three pieces on top of each other, then fold them in half. Cut them in half to create narrower strips.
Repeat the previous step twice more to create additional strips. Tape the top of the strips together to create a large tassel.
If you have a clipboard, attach the top of the strips to it for easier braiding. Divide the strips into three equal sections and start a 3-strand braid. Continue braiding until the braid reaches a length of about 7 inches. Cut off any excess plastic bag strips and tape the ends together to secure.
You will need two braids for the napkin ring. Line up the two braids next to each other. Tape the ends and certain sections to secure the two braids, creating a smooth surface for wrapping.
Leaving about 1 inch free, apply fabric glue along the plastic braid. Begin wrapping jute cord around the braid, securing it with glue.
Keep wrapping and leave about 1 inch at the end of the plastic braid.
Tape the two braid ends together to form a ring shape.
Wrap the entire plastic braid with jute cord until it is completely covered.
Trim any excess jute cord. Apply a final layer of fabric glue to secure the jute cord and yarn in place.

Please note that any crafts or DIY projects should be attempted with caution.

Recycling Plastic Bags at Retail Stores

Recycling Bins at Target

In most locations, plastic bags, wraps, and films cannot be recycled in curbside bins, but many local retail stores offer drop-off points for recycling them. Check online for drop-off locations near you, and you may find stores like Target that provide recycling bins for plastic bags, films, and wraps, contributing to efforts in reducing plastic waste and promoting a greener environment.

0 Comments

DIY Adjustable Statement Necklace with Yarn-Wrapped Ball Beads

10/17/2023

0 Comments

As an Amazon Associate I earn from qualifying purchases. Please read my Amazon Associates Program for more info

Step into the realm of DIY jewelry with a creative twist. Today, we're diving into the craft of making your very own necklace, uniquely designed using yarn-wrapped wooden beads. This DIY necklace tutorial unveils the magic of transforming ordinary jewelry-making supplies and everyday materials, such as natural wooden beads, into handcrafted yarn beads. With just a handful of essentials including yarn and fabric glue, you'll unlock the art of crafting necklace that truly reflect your individuality.

This tutorial uses yellow faux fur yarn, imparting a cozy and warm appearance. However, the beauty of this craft is its versatility. By choosing different colors or textures like red, blue, or any other variation, you can create a look and feel that's entirely your own. It's a fusion of warmth and elegance, making it ideal for both personal adornment and sharing the joy through handmade gifts.

And if you want to take it a step further, check out another tutorial video on making matching yarn-wrapped ball earrings in the same style. Follow the link below to learn how to create these fun and vibrant accessories!

"DIY Earrings Tutorial - Yarn-Wrapped Magic: Creating Unique Wooden Bead Earrings"
https://youtu.be/6wG_2atVoYo

Supplies:

Acrylic metallic faceted beads (gold) - 4 mm
CCB beads by Bead Landing™ (color: antique brass, copper coated plastic) - 10 mm round & 10 mm disc
Oxidized Brass 2 Hole Metal Spacer Bar Bead by hildie & jo
Natural wood beads - 15 mm: https://amzn.to/45xzDGu
Nail Polish (clear)
Fabric glue: https://amzn.to/3M5m0Ye
Pliers: https://amzn.to/3Qk4UIv
Scissors
Yellow Faux Fur Yarn
Waxed cotton cord - 1 mm: https://amzn.to/3Sl6r2H

Creating Yarn Ball Beads

Instructions:

Apply fabric glue to the top half of the wooden bead.
Wrap the yarn around the glued portion of the wooden bead.
Apply glue to the remaining half.
Continue wrapping yarn around the wooden bead until it is completely covered.
Trim any excess yarn. Apply more glue if necessary.
Allow the yarn ball beads to dry completely.

Assembling Adjustable Cord Necklace

Instructions:

Start by cutting a piece of black waxed cotton cord to a length of 34 inches.
Collect the following beads: Six 10-mm CCB round beads, Five Yellow yarn ball beads, Ten 4-mm acrylic faceted beads (gold)
Thread a 10-mm CCB round bead and a yellow yarn ball bead onto the waxed cotton cord.
Alternate between threading a 10-mm round bead and a yellow yarn bead.
Add five 4-mm acrylic faceted beads to each side.
Take an Oxidized Brass 2 Hole Metal Spacer Bar Bead. Thread each cord end through one hole of the spacer bar bead.
Thread one 4-mm acrylic faceted bead onto each cord end.
Tie a knot on each cord end to secure the beads and spacer bar.
So there you have it, your very own one-of-a-kind necklace. A touch of warmth, a dash of elegance, and a whole lot of you. Enjoy wearing it or gifting it to spread the joy of handmade creativity.

Creating Bead Holes Safely

If yarn has covered your bead holes, you can use a bead reamer or round-nose pliers to create an opening for the beads. When using a bead reamer or round-nose pliers, exercise caution to avoid injuring yourself.

Preventing Cord Fraying (Optional)

Instructions:

To prevent the cord from fraying when threading through beads multiple times, apply a small amount of nail polish to the cord's end.
Use a paper towel to remove any excess nail polish if necessary.
Allow the nail polish to dry completely before using the cord.

Please note that any crafts or DIY projects should be attempted with caution.

Explore necklaces with the same style as yarn-wrapped bead necklaces, but with different colors and textures for a unique look.

Yellow yarn wrapped bead statement necklace

Shades of red yarn wrapped bead statement necklace

Silver & white yarn wrapped bead statement necklace

0 Comments

BLOG

Easy DIY Navy Cord-Wrapped Ball Bead Earrings: A Step-by-Step Guide

How to Make Jute-Wrapped Napkin Rings from Plastic Bags

DIY Adjustable Statement Necklace with Yarn-Wrapped Ball Beads

Author

Archives

Categories